These results are ranked by popularity.
Error | |
---|---|
E540-0005 | Description: - Standard tray shift motor or finisher controller PCB failure - Standard tray HP sensor failure - Standard tray clock sensor failure - Standard tray shift motor load failure The encoder clock signal was not detected two or more times when |
E744-0002 | Description: Language file/boot ROM/USB memory error The language file is longer than the permitted size. |
E001-0001 | Description: Abnormally high temperature (detected by sub thermistor) The sub thermistor detected an abnormally high temperature (295 deg C) during temperature control. |
E719-0002 | Description: Erroneous communication with coin vendor (serial communication) - Disconnection from the coin vendor has been detected since communication started after confirmation of normal connection to the coin vendor (after power-on). - A serial commu |
E196-0002 | Description: Image processor PCB failure Error on writing and readout ROM of image processor PCB (option ROM). |
The most common error codes.
Error | |
---|---|
E540-0005 | Description: - Standard tray shift motor or finisher controller PCB failure - Standard tray HP sensor failure - Standard tray clock sensor failure - Standard tray shift motor load failure The encoder clock signal was not detected two or more times when |
E744-0002 | Description: Language file/boot ROM/USB memory error The language file is longer than the permitted size. |
E001-0001 | Description: Abnormally high temperature (detected by sub thermistor) The sub thermistor detected an abnormally high temperature (295 deg C) during temperature control. |
E719-0002 | Description: Erroneous communication with coin vendor (serial communication) - Disconnection from the coin vendor has been detected since communication started after confirmation of normal connection to the coin vendor (after power-on). - A serial commu |
E196-0002 | Description: Image processor PCB failure Error on writing and readout ROM of image processor PCB (option ROM). |
E540-0005 | Description: - Standard tray shift motor or finisher controller PCB failure - Standard tray HP sensor failure - Standard tray clock sensor failure - Standard tray shift motor load failure The encoder clock signal was not detected two or more times when |
E744-0002 | Description: Language file/boot ROM/USB memory error The language file is longer than the permitted size. |
E001-0001 | Description: Abnormally high temperature (detected by sub thermistor) The sub thermistor detected an abnormally high temperature (295 deg C) during temperature control. |
E719-0002 | Description: Erroneous communication with coin vendor (serial communication) - Disconnection from the coin vendor has been detected since communication started after confirmation of normal connection to the coin vendor (after power-on). - A serial commu |
E196-0002 | Description: Image processor PCB failure Error on writing and readout ROM of image processor PCB (option ROM). |