These results are ranked by popularity.
Error | |
---|---|
E520-0002 | Description: - Offset motor or finisher controller PCB failure - Offset HP sensor failure The offset motor was driven for 1000 ms in the HP sensor escape direction, but the offset HP sensor did not turn off. |
E575-0001 | Description: - Stack delivery motor or finisher controller PCB failure - Stack delivery HP sensor failure The stack delivery motor was driven for 2000 ms in the stack delivery direction (HP sensor approach direction), but the stack delivery HP sensor d |
E744-0002 | Description: Language file/boot ROM/USB memory error The language file is longer than the permitted size. |
E010-0000 | Description: Main motor failure The main motor is faulty. |
E531-0001 | Description: - Staple unit failure - Staple HP sensor failure - Finisher controller PCB failure The staple home position was not left when 400 ms have lapsed since start of staple operation. |
The most common error codes.
Error | |
---|---|
E520-0002 | Description: - Offset motor or finisher controller PCB failure - Offset HP sensor failure The offset motor was driven for 1000 ms in the HP sensor escape direction, but the offset HP sensor did not turn off. |
E575-0001 | Description: - Stack delivery motor or finisher controller PCB failure - Stack delivery HP sensor failure The stack delivery motor was driven for 2000 ms in the stack delivery direction (HP sensor approach direction), but the stack delivery HP sensor d |
E744-0002 | Description: Language file/boot ROM/USB memory error The language file is longer than the permitted size. |
E010-0000 | Description: Main motor failure The main motor is faulty. |
E531-0001 | Description: - Staple unit failure - Staple HP sensor failure - Finisher controller PCB failure The staple home position was not left when 400 ms have lapsed since start of staple operation. |
E520-0002 | Description: - Offset motor or finisher controller PCB failure - Offset HP sensor failure The offset motor was driven for 1000 ms in the HP sensor escape direction, but the offset HP sensor did not turn off. |
E575-0001 | Description: - Stack delivery motor or finisher controller PCB failure - Stack delivery HP sensor failure The stack delivery motor was driven for 2000 ms in the stack delivery direction (HP sensor approach direction), but the stack delivery HP sensor d |
E744-0002 | Description: Language file/boot ROM/USB memory error The language file is longer than the permitted size. |
E010-0000 | Description: Main motor failure The main motor is faulty. |
E531-0001 | Description: - Staple unit failure - Staple HP sensor failure - Finisher controller PCB failure The staple home position was not left when 400 ms have lapsed since start of staple operation. |