These results are ranked by popularity.
Error | |
---|---|
E739-0000 | Description: Erroneous communication between controller and network board The installed network board is incompatible. |
E003-0001 | Description: Abnormally low temperature (detected by sub thermistor) After the temperature detected by the sub thermistor has reached the specified value, it does not reach the specified value during initial rotation. |
E520-0001 | Description: - Offset motor or finisher controller PCB failure - Offset HP sensor failure The offset motor was driven for 1000 ms in the HP sensor approach direction, but the offset HP sensor did not turn on. |
E542-0005 | Description: - Optional tray motor or finisher controller PCB failure - Optional tray HP sensor failure - Optional tray clock sensor failure - Optional tray shift motor load failure The encoder clock signal was not detected two or more times when the o |
E744-0001 | Description: Language file/boot ROM/USB memory error The language file version does not match Bootable. |
The most common error codes.
Error | |
---|---|
E739-0000 | Description: Erroneous communication between controller and network board The installed network board is incompatible. |
E003-0001 | Description: Abnormally low temperature (detected by sub thermistor) After the temperature detected by the sub thermistor has reached the specified value, it does not reach the specified value during initial rotation. |
E520-0001 | Description: - Offset motor or finisher controller PCB failure - Offset HP sensor failure The offset motor was driven for 1000 ms in the HP sensor approach direction, but the offset HP sensor did not turn on. |
E542-0005 | Description: - Optional tray motor or finisher controller PCB failure - Optional tray HP sensor failure - Optional tray clock sensor failure - Optional tray shift motor load failure The encoder clock signal was not detected two or more times when the o |
E744-0001 | Description: Language file/boot ROM/USB memory error The language file version does not match Bootable. |
E739-0000 | Description: Erroneous communication between controller and network board The installed network board is incompatible. |
E003-0001 | Description: Abnormally low temperature (detected by sub thermistor) After the temperature detected by the sub thermistor has reached the specified value, it does not reach the specified value during initial rotation. |
E520-0001 | Description: - Offset motor or finisher controller PCB failure - Offset HP sensor failure The offset motor was driven for 1000 ms in the HP sensor approach direction, but the offset HP sensor did not turn on. |
E542-0005 | Description: - Optional tray motor or finisher controller PCB failure - Optional tray HP sensor failure - Optional tray clock sensor failure - Optional tray shift motor load failure The encoder clock signal was not detected two or more times when the o |
E744-0001 | Description: Language file/boot ROM/USB memory error The language file version does not match Bootable. |