Canon iR2220N Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iR2220N Top Searches

These results are ranked by popularity.

Error
E014-000Description: After the fixing motor drive signal is generated, the clock signal does not arrive within 1.3 sec
E740-0001Description: At power-on, the LAN card has a fault
E592-0006Description: In the course of sensor output automatic adjustment, the light-receiving voltage is 2.5 V or less even when the light-emitting voltage is set to 4.4 V. In the course of output automatic adjustment, the light-receiving voltage is 2.5 V or mor
E505-0001Description: When the main power is turned on, the checksum of the finisher controller PCB has a fault
E605-0001Description: A fault is detected in the battery for the image memory

Canon iR2220N Common Errors

The most common error codes.

Error
E014-000Description: After the fixing motor drive signal is generated, the clock signal does not arrive within 1.3 sec
E740-0001Description: At power-on, the LAN card has a fault
E592-0006Description: In the course of sensor output automatic adjustment, the light-receiving voltage is 2.5 V or less even when the light-emitting voltage is set to 4.4 V. In the course of output automatic adjustment, the light-receiving voltage is 2.5 V or mor
E505-0001Description: When the main power is turned on, the checksum of the finisher controller PCB has a fault
E605-0001Description: A fault is detected in the battery for the image memory
E014-000Description: After the fixing motor drive signal is generated, the clock signal does not arrive within 1.3 sec
E740-0001Description: At power-on, the LAN card has a fault
E592-0006Description: In the course of sensor output automatic adjustment, the light-receiving voltage is 2.5 V or less even when the light-emitting voltage is set to 4.4 V. In the course of output automatic adjustment, the light-receiving voltage is 2.5 V or mor
E505-0001Description: When the main power is turned on, the checksum of the finisher controller PCB has a fault
E605-0001Description: A fault is detected in the battery for the image memory