These results are ranked by popularity.
| Error | |
|---|---|
| E584-0001 | Description: Shutter drive motor or finisher controller PCB failure - Shutter open detection sensor failure - Shutter clutch failure The shutter open sensor did not turn on when 1000 ms have lapsed since the shutter unit had performed open operation, r |
| E052-0000 | Description: Erroneous connection to duplex unit Disconnection of the duplex unit was detected after power-on, detection of normal connection to the duplex unit, and start of communication |
| E540-0001 | Description: Standard tray shift motor or finisher controller PCB failure - Standard tray HP sensor failure - Standard tray clock sensor failure - Standard tray shift motor load failure The standard tray was moved but the paper surface was not detected |
| E584-0002 | Description: - Shutter drive motor or finisher controller PCB failure - Shutter open detection sensor failure - Shutter clutch failure The shutter open sensor did not turn off when 1000 ms have lapsed since the shutter unit had performed close operatio |
| E000-0000 | Description: Startup error The temperature detected by the main or sub thermistor does not rise to the specified value during startup control. |
The most common error codes.
| Error | |
|---|---|
| E584-0001 | Description: Shutter drive motor or finisher controller PCB failure - Shutter open detection sensor failure - Shutter clutch failure The shutter open sensor did not turn on when 1000 ms have lapsed since the shutter unit had performed open operation, r |
| E052-0000 | Description: Erroneous connection to duplex unit Disconnection of the duplex unit was detected after power-on, detection of normal connection to the duplex unit, and start of communication |
| E540-0001 | Description: Standard tray shift motor or finisher controller PCB failure - Standard tray HP sensor failure - Standard tray clock sensor failure - Standard tray shift motor load failure The standard tray was moved but the paper surface was not detected |
| E584-0002 | Description: - Shutter drive motor or finisher controller PCB failure - Shutter open detection sensor failure - Shutter clutch failure The shutter open sensor did not turn off when 1000 ms have lapsed since the shutter unit had performed close operatio |
| E000-0000 | Description: Startup error The temperature detected by the main or sub thermistor does not rise to the specified value during startup control. |
| E584-0001 | Description: Shutter drive motor or finisher controller PCB failure - Shutter open detection sensor failure - Shutter clutch failure The shutter open sensor did not turn on when 1000 ms have lapsed since the shutter unit had performed open operation, r |
| E052-0000 | Description: Erroneous connection to duplex unit Disconnection of the duplex unit was detected after power-on, detection of normal connection to the duplex unit, and start of communication |
| E540-0001 | Description: Standard tray shift motor or finisher controller PCB failure - Standard tray HP sensor failure - Standard tray clock sensor failure - Standard tray shift motor load failure The standard tray was moved but the paper surface was not detected |
| E584-0002 | Description: - Shutter drive motor or finisher controller PCB failure - Shutter open detection sensor failure - Shutter clutch failure The shutter open sensor did not turn off when 1000 ms have lapsed since the shutter unit had performed close operatio |
| E000-0000 | Description: Startup error The temperature detected by the main or sub thermistor does not rise to the specified value during startup control. |
