These results are ranked by popularity.
Error | |
---|---|
E733-0000 | Description: Erroneous communication between controller and printer Cannot communicate with the printer at startup. |
E003-0001 | Description: Abnormally low temperature (detected by sub thermistor) After the temperature detected by the sub thermistor has reached the specified value, it does not reach the specified value during initial rotation. |
E500-0001 | Description: Finisher communication error Data communication could not be performed normally. It has been retried three times in vain. |
E542-0003 | Description: - Optional tray motor or finisher controller PCB failure - Optional tray HP sensor failure - Optional tray clock sensor failure - Optional tray shift motor load failure The optional tray was moved upward, but it did not reach the HP sensor |
E736-0000 | Description: CCU communication error The installed modem PCB is incompatible. |
The most common error codes.
Error | |
---|---|
E733-0000 | Description: Erroneous communication between controller and printer Cannot communicate with the printer at startup. |
E003-0001 | Description: Abnormally low temperature (detected by sub thermistor) After the temperature detected by the sub thermistor has reached the specified value, it does not reach the specified value during initial rotation. |
E500-0001 | Description: Finisher communication error Data communication could not be performed normally. It has been retried three times in vain. |
E542-0003 | Description: - Optional tray motor or finisher controller PCB failure - Optional tray HP sensor failure - Optional tray clock sensor failure - Optional tray shift motor load failure The optional tray was moved upward, but it did not reach the HP sensor |
E736-0000 | Description: CCU communication error The installed modem PCB is incompatible. |
E733-0000 | Description: Erroneous communication between controller and printer Cannot communicate with the printer at startup. |
E003-0001 | Description: Abnormally low temperature (detected by sub thermistor) After the temperature detected by the sub thermistor has reached the specified value, it does not reach the specified value during initial rotation. |
E500-0001 | Description: Finisher communication error Data communication could not be performed normally. It has been retried three times in vain. |
E542-0003 | Description: - Optional tray motor or finisher controller PCB failure - Optional tray HP sensor failure - Optional tray clock sensor failure - Optional tray shift motor load failure The optional tray was moved upward, but it did not reach the HP sensor |
E736-0000 | Description: CCU communication error The installed modem PCB is incompatible. |