These results are ranked by popularity.
| Error | |
|---|---|
| E719-0000 | Description: Erroneous communication with card reader (serial communication) - Disconnection from the card reader has been detected since communication started after confirmation of normal connection to the card reader (after power-on). - A serial commu |
| E052-0000 | Description: Duplex unit connection error Disconnection of the duplex unit was detected after power-on, detection of normal connection to the duplex unit, and start of communication. |
| E540-0005 | Description: - Standard tray shift motor or finisher controller PCB failure - Standard tray HP sensor failure - Standard tray clock sensor failure - Standard tray shift motor load failure The encoder clock signal was not detected two or more times |
| E719-0002 | Description: Erroneous communication with coin vender (serial communication) - Disconnection from the coin vendor has been detected since communication started after confirmation of normal connection to the coin vendor (after power-on). - A serial commu |
| E744-0001 | Description: Language file/boot ROM/USB memory error |
The most common error codes.
| Error | |
|---|---|
| E719-0000 | Description: Erroneous communication with card reader (serial communication) - Disconnection from the card reader has been detected since communication started after confirmation of normal connection to the card reader (after power-on). - A serial commu |
| E052-0000 | Description: Duplex unit connection error Disconnection of the duplex unit was detected after power-on, detection of normal connection to the duplex unit, and start of communication. |
| E540-0005 | Description: - Standard tray shift motor or finisher controller PCB failure - Standard tray HP sensor failure - Standard tray clock sensor failure - Standard tray shift motor load failure The encoder clock signal was not detected two or more times |
| E719-0002 | Description: Erroneous communication with coin vender (serial communication) - Disconnection from the coin vendor has been detected since communication started after confirmation of normal connection to the coin vendor (after power-on). - A serial commu |
| E744-0001 | Description: Language file/boot ROM/USB memory error |
| E719-0000 | Description: Erroneous communication with card reader (serial communication) - Disconnection from the card reader has been detected since communication started after confirmation of normal connection to the card reader (after power-on). - A serial commu |
| E052-0000 | Description: Duplex unit connection error Disconnection of the duplex unit was detected after power-on, detection of normal connection to the duplex unit, and start of communication. |
| E540-0005 | Description: - Standard tray shift motor or finisher controller PCB failure - Standard tray HP sensor failure - Standard tray clock sensor failure - Standard tray shift motor load failure The encoder clock signal was not detected two or more times |
| E744-0001 | Description: Language file/boot ROM/USB memory error |
| E719-0002 | Description: Erroneous communication with coin vender (serial communication) - Disconnection from the coin vendor has been detected since communication started after confirmation of normal connection to the coin vendor (after power-on). - A serial commu |
