Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iR2018 Top Searches

These results are ranked by popularity.

Error
E540-0001Description: Standard tray shift motor or finisher controller PCB failure - Standard tray HP sensor failure - Standard tray clock sensor failure - Standard tray shift motor load failure The standard tray was moved but the paper surface was not detected
E000-0000Description: Startup error The temperature detected by the main or sub thermistor does not rise to the specified value during startup control.
E730-0000Description: Inside error of the image processor PCB (PDL system error) The inside of the image processor PCB is faulty.
E584-0002Description: - Shutter drive motor or finisher controller PCB failure - Shutter open detection sensor failure - Shutter clutch failure The shutter open sensor did not turn off when 1000 ms have lapsed since the shutter unit had performed close operatio
E100-0000Description: BD detection PCB failure The BD detection PCB is faulty

Canon iR2018 Common Errors

The most common error codes.

Error
E540-0001Description: Standard tray shift motor or finisher controller PCB failure - Standard tray HP sensor failure - Standard tray clock sensor failure - Standard tray shift motor load failure The standard tray was moved but the paper surface was not detected
E000-0000Description: Startup error The temperature detected by the main or sub thermistor does not rise to the specified value during startup control.
E730-0000Description: Inside error of the image processor PCB (PDL system error) The inside of the image processor PCB is faulty.
E584-0002Description: - Shutter drive motor or finisher controller PCB failure - Shutter open detection sensor failure - Shutter clutch failure The shutter open sensor did not turn off when 1000 ms have lapsed since the shutter unit had performed close operatio
E100-0000Description: BD detection PCB failure The BD detection PCB is faulty
E540-0001Description: Standard tray shift motor or finisher controller PCB failure - Standard tray HP sensor failure - Standard tray clock sensor failure - Standard tray shift motor load failure The standard tray was moved but the paper surface was not detected
E730-0000Description: Inside error of the image processor PCB (PDL system error) The inside of the image processor PCB is faulty.
E584-0002Description: - Shutter drive motor or finisher controller PCB failure - Shutter open detection sensor failure - Shutter clutch failure The shutter open sensor did not turn off when 1000 ms have lapsed since the shutter unit had performed close operatio
E000-0000Description: Startup error The temperature detected by the main or sub thermistor does not rise to the specified value during startup control.
E100-0000Description: BD detection PCB failure The BD detection PCB is faulty