Canon iR2016J Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iR2016J Top Searches

These results are ranked by popularity.

Error
E733-0000Description: Erroneous communication between controller and printer Cannot communicate with the printer at startup.
E001-0000Description: Fixing unit temperature rise detection (by main thermistor) The main thermistor detected an abnormally high temperature (240 deg C) during temperature control.
E197-0000Description: Printer engine communication error Erroneous communication between the DC controller PCB and image processor PCB was detected.
E542-0002Description: - Optional tray motor or finisher controller PCB failure - Optional tray HP sensor failure - Optional tray clock sensor failure - Optional tray shift motor load failure Cannot move (to the pickup position) within the specified time.
E736-0000Description: CCU communication error The installed modem PCB is incompatible.

Canon iR2016J Common Errors

The most common error codes.

Error
E733-0000Description: Erroneous communication between controller and printer Cannot communicate with the printer at startup.
E001-0000Description: Fixing unit temperature rise detection (by main thermistor) The main thermistor detected an abnormally high temperature (240 deg C) during temperature control.
E197-0000Description: Printer engine communication error Erroneous communication between the DC controller PCB and image processor PCB was detected.
E542-0002Description: - Optional tray motor or finisher controller PCB failure - Optional tray HP sensor failure - Optional tray clock sensor failure - Optional tray shift motor load failure Cannot move (to the pickup position) within the specified time.
E736-0000Description: CCU communication error The installed modem PCB is incompatible.
E733-0000Description: Erroneous communication between controller and printer Cannot communicate with the printer at startup.
E001-0000Description: Fixing unit temperature rise detection (by main thermistor) The main thermistor detected an abnormally high temperature (240 deg C) during temperature control.
E197-0000Description: Printer engine communication error Erroneous communication between the DC controller PCB and image processor PCB was detected.
E542-0002Description: - Optional tray motor or finisher controller PCB failure - Optional tray HP sensor failure - Optional tray clock sensor failure - Optional tray shift motor load failure Cannot move (to the pickup position) within the specified time.
E736-0000Description: CCU communication error The installed modem PCB is incompatible.