Canon iR1730 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iR1730 Top Searches

These results are ranked by popularity.

Error
E246-0005Description: System error
E820-0002Description: Developing Cooling Fan (Rear) (FM8) error A lock signal was detected for 5 seconds while the Developing Cooling Fan (Rear) (FM8) was being stopped. *The same status was detected again after executing an error retry
E014-0001Description: Fixing Motor (M1) rotation error Detection was performed every 100 msec since the start of drive and there had been no lock detection signal in 2 seconds.
E531-8001Description: Staple Motor (M9) error The Stapler failed to move from the Staple HP Sensor (S11) within the staple execution time (0.45sec).
E110-0003Description: Laser Scanner Motor error The speed lock signal of the Laser Scanner Motor never showed lock status although 6.5 seconds (when switching from low speed to normal speed) or 8 seconds (when switching from normal speed to low speed) have passe

Canon iR1730 Common Errors

The most common error codes.

Error
E246-0005Description: System error
E820-0002Description: Developing Cooling Fan (Rear) (FM8) error A lock signal was detected for 5 seconds while the Developing Cooling Fan (Rear) (FM8) was being stopped. *The same status was detected again after executing an error retry
E014-0001Description: Fixing Motor (M1) rotation error Detection was performed every 100 msec since the start of drive and there had been no lock detection signal in 2 seconds.
E531-8001Description: Staple Motor (M9) error The Stapler failed to move from the Staple HP Sensor (S11) within the staple execution time (0.45sec).
E110-0003Description: Laser Scanner Motor error The speed lock signal of the Laser Scanner Motor never showed lock status although 6.5 seconds (when switching from low speed to normal speed) or 8 seconds (when switching from normal speed to low speed) have passe
E246-0005Description: System error
E820-0002Description: Developing Cooling Fan (Rear) (FM8) error A lock signal was detected for 5 seconds while the Developing Cooling Fan (Rear) (FM8) was being stopped. *The same status was detected again after executing an error retry
E014-0001Description: Fixing Motor (M1) rotation error Detection was performed every 100 msec since the start of drive and there had been no lock detection signal in 2 seconds.
E531-8001Description: Staple Motor (M9) error The Stapler failed to move from the Staple HP Sensor (S11) within the staple execution time (0.45sec).
E110-0003Description: Laser Scanner Motor error The speed lock signal of the Laser Scanner Motor never showed lock status although 6.5 seconds (when switching from low speed to normal speed) or 8 seconds (when switching from normal speed to low speed) have passe