Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iR105 Top Searches

These results are ranked by popularity.

Error
E610Description: The HDD coding key is faulty. The SRAM/PCB is faulty. The battery has become exhausted, leading to loss of SRAM contents.
E067-0000Description: There is an error in the high-voltage output. An error is detected in two or more of the following at the same time: the primary high voltage, pre-transfer high voltage, transfer high voltage, and separation high voltage. Or, an error (leak
E820-0000Description: The rotation of the drum fan is faulty. The lock signal is detected for 5 sec or more although the drum fan is being driven.
E222-0000Description: The rise in temperature of the scanning lamp heater is faulty. During the initial activation after power-on, the reading does not reach 70 deg C within 5 min after the heater is turned on. Or, during standby or reading operation, the readin
E003-0000Description: The fixing temperature is too low after a standby state. The reading of the main thermistor is 70 deg C or lower for 2 sec or more after it has reached 100 deg C.

Canon iR105 Common Errors

The most common error codes.

Error
E610Description: The HDD coding key is faulty. The SRAM/PCB is faulty. The battery has become exhausted, leading to loss of SRAM contents.
E067-0000Description: There is an error in the high-voltage output. An error is detected in two or more of the following at the same time: the primary high voltage, pre-transfer high voltage, transfer high voltage, and separation high voltage. Or, an error (leak
E820-0000Description: The rotation of the drum fan is faulty. The lock signal is detected for 5 sec or more although the drum fan is being driven.
E222-0000Description: The rise in temperature of the scanning lamp heater is faulty. During the initial activation after power-on, the reading does not reach 70 deg C within 5 min after the heater is turned on. Or, during standby or reading operation, the readin
E003-0000Description: The fixing temperature is too low after a standby state. The reading of the main thermistor is 70 deg C or lower for 2 sec or more after it has reached 100 deg C.
E610Description: The HDD coding key is faulty. The SRAM/PCB is faulty. The battery has become exhausted, leading to loss of SRAM contents.
E067-0000Description: There is an error in the high-voltage output. An error is detected in two or more of the following at the same time: the primary high voltage, pre-transfer high voltage, transfer high voltage, and separation high voltage. Or, an error (leak
E820-0000Description: The rotation of the drum fan is faulty. The lock signal is detected for 5 sec or more although the drum fan is being driven.
E222-0000Description: The rise in temperature of the scanning lamp heater is faulty. During the initial activation after power-on, the reading does not reach 70 deg C within 5 min after the heater is turned on. Or, during standby or reading operation, the readin
E003-0000Description: The fixing temperature is too low after a standby state. The reading of the main thermistor is 70 deg C or lower for 2 sec or more after it has reached 100 deg C.