These results are ranked by popularity.
Error | |
---|---|
E196-0001 | Description: Flash ROM write/read error - The write/read of Flash ROM in the image processor PCB is faulty. |
000a | Description: Paper absence (Pull out the document.) SR2001 - The Document set sensor has been held off since start of pickup. |
E000-0000 | Description: Startup error - The temperature detected by the main or sub thermistor does not rise to the specified value during startup control. |
E196-0002 | Description: PCL ROM write/read error - The write/read of PCL ROM in the image processor PCB is faulty. |
000c | Description: Delivery delay jam SR2002 - In case the internal software signal "Delivery Sensor OFF" set in the system cannot be detected, when the leading edge of paper is detected by the document edge sensor and fed the prescribed distance, and after t |
The most common error codes.
Error | |
---|---|
E196-0001 | Description: Flash ROM write/read error - The write/read of Flash ROM in the image processor PCB is faulty. |
000a | Description: Paper absence (Pull out the document.) SR2001 - The Document set sensor has been held off since start of pickup. |
E000-0000 | Description: Startup error - The temperature detected by the main or sub thermistor does not rise to the specified value during startup control. |
E196-0002 | Description: PCL ROM write/read error - The write/read of PCL ROM in the image processor PCB is faulty. |
000c | Description: Delivery delay jam SR2002 - In case the internal software signal "Delivery Sensor OFF" set in the system cannot be detected, when the leading edge of paper is detected by the document edge sensor and fed the prescribed distance, and after t |
E196-0001 | Description: Flash ROM write/read error - The write/read of Flash ROM in the image processor PCB is faulty. |
000a | Description: Paper absence (Pull out the document.) SR2001 - The Document set sensor has been held off since start of pickup. |
E000-0000 | Description: Startup error - The temperature detected by the main or sub thermistor does not rise to the specified value during startup control. |
E196-0002 | Description: PCL ROM write/read error - The write/read of PCL ROM in the image processor PCB is faulty. |
000c | Description: Delivery delay jam SR2002 - In case the internal software signal "Delivery Sensor OFF" set in the system cannot be detected, when the leading edge of paper is detected by the document edge sensor and fed the prescribed distance, and after t |