Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iR1021 Top Searches

These results are ranked by popularity.

Error
E719-0000Description: Erroneous communication with card reader (serial communication) - Disconnection from the card reader has been detected since communication started after confirmation of normal connection to the card reader (after power-on). - A serial comm
0104Description: Pickup Delay Jam SR11 - After execution of a pickup retry, the registration sensor (SR11) does not detect the leading edge of paper within a specific period of time. Or after the duplex drive solenoid (SL1) is on, the registration sensor (S
E003-0000Description: Abnormally low temperature (detected by main thermistor) - After the temperature detected by the main thermistor has reached the specified value, it does not reach the specified value during initial rotation.
E719-0001Description: Erroneous communication with coin vendor (serial communication) - Disconnection from the coin vendor has been detected since communication started after confirmation of normal connection to the coin vendor (after power-on). - A serial com
010cDescription: Delivery Sensor Delay Jam SR5 - After the registration sensor (SR11) has detected the leading edge of paper, the delivery sensor (SR5) does not detect the leading edge of paper within a specific period of time.

Canon iR1021 Common Errors

The most common error codes.

Error
E719-0000Description: Erroneous communication with card reader (serial communication) - Disconnection from the card reader has been detected since communication started after confirmation of normal connection to the card reader (after power-on). - A serial comm
0104Description: Pickup Delay Jam SR11 - After execution of a pickup retry, the registration sensor (SR11) does not detect the leading edge of paper within a specific period of time. Or after the duplex drive solenoid (SL1) is on, the registration sensor (S
E003-0000Description: Abnormally low temperature (detected by main thermistor) - After the temperature detected by the main thermistor has reached the specified value, it does not reach the specified value during initial rotation.
E719-0001Description: Erroneous communication with coin vendor (serial communication) - Disconnection from the coin vendor has been detected since communication started after confirmation of normal connection to the coin vendor (after power-on). - A serial com
010cDescription: Delivery Sensor Delay Jam SR5 - After the registration sensor (SR11) has detected the leading edge of paper, the delivery sensor (SR5) does not detect the leading edge of paper within a specific period of time.
E719-0000Description: Erroneous communication with card reader (serial communication) - Disconnection from the card reader has been detected since communication started after confirmation of normal connection to the card reader (after power-on). - A serial comm
0104Description: Pickup Delay Jam SR11 - After execution of a pickup retry, the registration sensor (SR11) does not detect the leading edge of paper within a specific period of time. Or after the duplex drive solenoid (SL1) is on, the registration sensor (S
E003-0000Description: Abnormally low temperature (detected by main thermistor) - After the temperature detected by the main thermistor has reached the specified value, it does not reach the specified value during initial rotation.
E719-0001Description: Erroneous communication with coin vendor (serial communication) - Disconnection from the coin vendor has been detected since communication started after confirmation of normal connection to the coin vendor (after power-on). - A serial com
010cDescription: Delivery Sensor Delay Jam SR5 - After the registration sensor (SR11) has detected the leading edge of paper, the delivery sensor (SR5) does not detect the leading edge of paper within a specific period of time.