These results are ranked by popularity.
Error | |
---|---|
2F6A | Display: Hardware error 038A0002-2F6A Turn off printer, wait a while, then turn it on again. |
2E39 | Display: The Roll 2 (Lower) is empty. Lift the release lever and replace the roll. |
1015 | Display: This type of paper is not compatible with HP-GL/2. |
2F21 | Display: Rel lever is in wrong position. Turn off printer, wait, then turn on again. |
2931 | Display: Cutting Mode not Automatic. Remove stacker and print again or cancel and change settings. Print again Cancel |
The most common error codes.
Error | |
---|---|
2F6A | Display: Hardware error 038A0002-2F6A Turn off printer, wait a while, then turn it on again. |
2E39 | Display: The Roll 2 (Lower) is empty. Lift the release lever and replace the roll. |
1015 | Display: This type of paper is not compatible with HP-GL/2. |
2F21 | Display: Rel lever is in wrong position. Turn off printer, wait, then turn on again. |
2931 | Display: Cutting Mode not Automatic. Remove stacker and print again or cancel and change settings. Print again Cancel |
2F6A | Display: Hardware error 038A0002-2F6A Turn off printer, wait a while, then turn it on again. |
2E39 | Display: The Roll 2 (Lower) is empty. Lift the release lever and replace the roll. |
1015 | Display: This type of paper is not compatible with HP-GL/2. |
2F21 | Display: Rel lever is in wrong position. Turn off printer, wait, then turn on again. |
2931 | Display: Cutting Mode not Automatic. Remove stacker and print again or cancel and change settings. Print again Cancel |