These results are ranked by popularity.
Error | |
---|---|
E001-0000 | Description: Abnormally high temperature (detected by main thermistor) The main thermistor detected an abnormally high temperature 235 deg C) during temperature control |
E733-0000 | Description: Erroneous communication between controller and printer Cannot communicate with the printer at startup. |
000f | Description: User ADF open (sensor of the reader unit ) (Related to ADF) |
E500-0001 | Description: Finisher communication error Data communication could not be performed normally. It has been retried three times in vain. |
E542-0003 | Description: - Optional tray motor or finisher controller PCB failure - Optional tray HP sensor failure - Optional tray clock sensor failure - Optional tray shift motor load failure - The optional tray was moved upward, but it did not reach the HP se |
The most common error codes.
Error | |
---|---|
E001-0000 | Description: Abnormally high temperature (detected by main thermistor) The main thermistor detected an abnormally high temperature 235 deg C) during temperature control |
E733-0000 | Description: Erroneous communication between controller and printer Cannot communicate with the printer at startup. |
000f | Description: User ADF open (sensor of the reader unit ) (Related to ADF) |
E500-0001 | Description: Finisher communication error Data communication could not be performed normally. It has been retried three times in vain. |
E542-0003 | Description: - Optional tray motor or finisher controller PCB failure - Optional tray HP sensor failure - Optional tray clock sensor failure - Optional tray shift motor load failure - The optional tray was moved upward, but it did not reach the HP se |
E001-0000 | Description: Abnormally high temperature (detected by main thermistor) The main thermistor detected an abnormally high temperature 235 deg C) during temperature control |
E733-0000 | Description: Erroneous communication between controller and printer Cannot communicate with the printer at startup. |
000f | Description: User ADF open (sensor of the reader unit ) (Related to ADF) |
E500-0001 | Description: Finisher communication error Data communication could not be performed normally. It has been retried three times in vain. |
E542-0003 | Description: - Optional tray motor or finisher controller PCB failure - Optional tray HP sensor failure - Optional tray clock sensor failure - Optional tray shift motor load failure - The optional tray was moved upward, but it did not reach the HP se |