These results are ranked by popularity.
Error | |
---|---|
E739-0000 | Description: Erroneous communication between controller and network board The installed network board is incompatible. |
E002-0000 | Description: Low temperature during temperature control. The target temperature is not reached during temperature control. |
E520-0001 | Description: - Offset motor or finisher controller PCB failure - Offset HP sensor failure - The offset motor was driven for 1000 ms in the HP sensor approach direction, but the offset HP sensor did not turn on. |
000 | Description: Delivery reversal sensor stationary (PI6) (Related to ADF) |
E542-0005 | Description: - Optional tray motor or finisher controller PCB failure - Optional tray HP sensor failure - Optional tray clock sensor failure - Optional tray shift motor load failure - The encoder clock signal was not detected two or more times when t |
The most common error codes.
Error | |
---|---|
E739-0000 | Description: Erroneous communication between controller and network board The installed network board is incompatible. |
E002-0000 | Description: Low temperature during temperature control. The target temperature is not reached during temperature control. |
E520-0001 | Description: - Offset motor or finisher controller PCB failure - Offset HP sensor failure - The offset motor was driven for 1000 ms in the HP sensor approach direction, but the offset HP sensor did not turn on. |
000 | Description: Delivery reversal sensor stationary (PI6) (Related to ADF) |
E542-0005 | Description: - Optional tray motor or finisher controller PCB failure - Optional tray HP sensor failure - Optional tray clock sensor failure - Optional tray shift motor load failure - The encoder clock signal was not detected two or more times when t |
E739-0000 | Description: Erroneous communication between controller and network board The installed network board is incompatible. |
E002-0000 | Description: Low temperature during temperature control. The target temperature is not reached during temperature control. |
E520-0001 | Description: - Offset motor or finisher controller PCB failure - Offset HP sensor failure - The offset motor was driven for 1000 ms in the HP sensor approach direction, but the offset HP sensor did not turn on. |
000 | Description: Delivery reversal sensor stationary (PI6) (Related to ADF) |
E542-0005 | Description: - Optional tray motor or finisher controller PCB failure - Optional tray HP sensor failure - Optional tray clock sensor failure - Optional tray shift motor load failure - The encoder clock signal was not detected two or more times when t |