These results are ranked by popularity.
Error | |
---|---|
E012-0001 | Description: Motor startup abnormality ITB motor speed detection signal frequency reaches the specified frequency but is then out of synch after 2 sec. or longer of operation. |
E196-2000 | Description: DCON ROM abnormality Error in accessing to the Flash ROM (2MB) for storing setting values |
E806-0000 | Description: Fan Motor 1 failure The Fan Motor 1 (power supply) cannot rotate at the specified revolution. |
E015-0001 | Description: Developing roller release operation defect After the specified time from rotating the main motor for the developing roller depress/release, the output of the developing home position sensor does not change. |
E198-0000 | Description: DC controller memory failure DC controller memory failure. |
The most common error codes.
Error | |
---|---|
E012-0001 | Description: Motor startup abnormality ITB motor speed detection signal frequency reaches the specified frequency but is then out of synch after 2 sec. or longer of operation. |
E196-2000 | Description: DCON ROM abnormality Error in accessing to the Flash ROM (2MB) for storing setting values |
E806-0000 | Description: Fan Motor 1 failure The Fan Motor 1 (power supply) cannot rotate at the specified revolution. |
E015-0001 | Description: Developing roller release operation defect After the specified time from rotating the main motor for the developing roller depress/release, the output of the developing home position sensor does not change. |
E198-0000 | Description: DC controller memory failure DC controller memory failure. |
E012-0001 | Description: Motor startup abnormality ITB motor speed detection signal frequency reaches the specified frequency but is then out of synch after 2 sec. or longer of operation. |
E196-2000 | Description: DCON ROM abnormality Error in accessing to the Flash ROM (2MB) for storing setting values |
E806-0000 | Description: Fan Motor 1 failure The Fan Motor 1 (power supply) cannot rotate at the specified revolution. |
E015-0001 | Description: Developing roller release operation defect After the specified time from rotating the main motor for the developing roller depress/release, the output of the developing home position sensor does not change. |
E198-0000 | Description: DC controller memory failure DC controller memory failure. |