Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon D680 Top Searches

These results are ranked by popularity.

Error
E000Description: The error history indicates any of the following error codes 4 times: E001, E002, E003.
E001-000Description: The main thermistor detects 230°C/446°F or higher for 1 sec or more.
E001-001Description: The sub thermistor detects 300°C/572°F or higher for 0.2 sec or more.
E002-000Description: During printing, the main thermistor detects 0°C/32°F or lower for 1 sec or more continuously. About 10 sec or later after power-on/start of printing, the main thermistor detects less than 120°C/248°F for 1 sec or more continuously.
E002-001Description: After power-on/start of printing, the reading of the main thermistor does not reach the target value -15°C/11°F or higher within 75 sec. About 10 sec or later after the heater is supplied with power, the sub thermistor detects less than 75°C

Canon D680 Common Errors

The most common error codes.

Error
E000Description: The error history indicates any of the following error codes 4 times: E001, E002, E003.
E001-000Description: The main thermistor detects 230°C/446°F or higher for 1 sec or more.
E001-001Description: The sub thermistor detects 300°C/572°F or higher for 0.2 sec or more.
E002-000Description: During printing, the main thermistor detects 0°C/32°F or lower for 1 sec or more continuously. About 10 sec or later after power-on/start of printing, the main thermistor detects less than 120°C/248°F for 1 sec or more continuously.
E002-001Description: After power-on/start of printing, the reading of the main thermistor does not reach the target value -15°C/11°F or higher within 75 sec. About 10 sec or later after the heater is supplied with power, the sub thermistor detects less than 75°C
E000Description: The error history indicates any of the following error codes 4 times: E001, E002, E003.
E001-000Description: The main thermistor detects 230°C/446°F or higher for 1 sec or more.
E001-001Description: The sub thermistor detects 300°C/572°F or higher for 0.2 sec or more.
E002-000Description: During printing, the main thermistor detects 0°C/32°F or lower for 1 sec or more continuously. About 10 sec or later after power-on/start of printing, the main thermistor detects less than 120°C/248°F for 1 sec or more continuously.
E002-001Description: After power-on/start of printing, the reading of the main thermistor does not reach the target value -15°C/11°F or higher within 75 sec. About 10 sec or later after the heater is supplied with power, the sub thermistor detects less than 75°C