Canon CP2120 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon CP2120 Top Searches

These results are ranked by popularity.

Error
E5F8-0002Description: The connector of the paper push-on plate home position sensor is found to be disconnected.
E530-0002Description: The alignment plate does not return to the alignment plate home position sensor even when the alignment motor has been driven for 2 sec.
E070-Description: The transfer belt sensor (S51) continues to detect the home position for the transfer belt.
E000-0031Description: Within a temperature range between 50°C and 190°C as detected by the thermistor, the increase in temperature within 30 sec is less than 5°C.
E809Description: The reader unit power supply fan (FM1) is faulty.

Canon CP2120 Common Errors

The most common error codes.

Error
E5F8-0002Description: The connector of the paper push-on plate home position sensor is found to be disconnected.
E530-0002Description: The alignment plate does not return to the alignment plate home position sensor even when the alignment motor has been driven for 2 sec.
E070-Description: The transfer belt sensor (S51) continues to detect the home position for the transfer belt.
E000-0031Description: Within a temperature range between 50°C and 190°C as detected by the thermistor, the increase in temperature within 30 sec is less than 5°C.
E809Description: The reader unit power supply fan (FM1) is faulty.
E5F8-0002Description: The connector of the paper push-on plate home position sensor is found to be disconnected.
E530-0002Description: The alignment plate does not return to the alignment plate home position sensor even when the alignment motor has been driven for 2 sec.
E070-Description: The transfer belt sensor (S51) continues to detect the home position for the transfer belt.
E000-0031Description: Within a temperature range between 50°C and 190°C as detected by the thermistor, the increase in temperature within 30 sec is less than 5°C.
E809Description: The reader unit power supply fan (FM1) is faulty.