Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon CLC4080i Top Searches

These results are ranked by popularity.

Error
E004-0201Description: Fixing unit protection circuit trouble When the difference in temperature between the front and back of the fixing belt is higher than the rating
E592-8006Description: Sheet trailing edge, side registration sensor error When the light sensing voltage is more than 2.0 V even though the lightemitting duty ratio of side registration sensor 2 (LED2, PTR2) has been set to 0%
E537-8001Description: Front alignment error When the alignment plate fails to leave the alignment plate back home position sensor position even though the alignment plate back motor was driven for 4 sec.
E227-0003Description: Reader unit power supply error When the 24 V port is OFF when a job is finished.
E751-13XxDescription: Drum Unit / Faulty Connection of the Toner Receptacle See below X: reading=1, writing=2 x indicates color [Y=1, M=2, C=3, K=4] Write error in the memory inside the toner cartridge (when the number of retries has exceeded the rating)

Canon CLC4080i Common Errors

The most common error codes.

Error
E004-0201Description: Fixing unit protection circuit trouble When the difference in temperature between the front and back of the fixing belt is higher than the rating
E592-8006Description: Sheet trailing edge, side registration sensor error When the light sensing voltage is more than 2.0 V even though the lightemitting duty ratio of side registration sensor 2 (LED2, PTR2) has been set to 0%
E537-8001Description: Front alignment error When the alignment plate fails to leave the alignment plate back home position sensor position even though the alignment plate back motor was driven for 4 sec.
E227-0003Description: Reader unit power supply error When the 24 V port is OFF when a job is finished.
E751-13XxDescription: Drum Unit / Faulty Connection of the Toner Receptacle See below X: reading=1, writing=2 x indicates color [Y=1, M=2, C=3, K=4] Write error in the memory inside the toner cartridge (when the number of retries has exceeded the rating)
E004-0201Description: Fixing unit protection circuit trouble When the difference in temperature between the front and back of the fixing belt is higher than the rating
E592-8006Description: Sheet trailing edge, side registration sensor error When the light sensing voltage is more than 2.0 V even though the lightemitting duty ratio of side registration sensor 2 (LED2, PTR2) has been set to 0%
E537-8001Description: Front alignment error When the alignment plate fails to leave the alignment plate back home position sensor position even though the alignment plate back motor was driven for 4 sec.
E227-0003Description: Reader unit power supply error When the 24 V port is OFF when a job is finished.
E751-13XxDescription: Drum Unit / Faulty Connection of the Toner Receptacle See below X: reading=1, writing=2 x indicates color [Y=1, M=2, C=3, K=4] Write error in the memory inside the toner cartridge (when the number of retries has exceeded the rating)