These results are ranked by popularity.
Error | |
---|---|
F900 | Description: The country code was not entered correctly. |
6C00 | Description: The center thermistor of the fuser unit detected a temperature higher than the specified value. |
8D00 | Description: When the power switch was turned ON, the eject sensor detected paper pass or detected that the fuser cover was open. |
9A00 | Description: There is no paper set in the MP tray while feeding from the MP tray is fixed. |
BC00 | Description: Although operation was retried due to error AC00 that occurred while scanning the fax, white or black correction data for the second side CIS was not within the correct range. |
The most common error codes.
Error | |
---|---|
F900 | Description: The country code was not entered correctly. |
6C00 | Description: The center thermistor of the fuser unit detected a temperature higher than the specified value. |
8D00 | Description: When the power switch was turned ON, the eject sensor detected paper pass or detected that the fuser cover was open. |
9A00 | Description: There is no paper set in the MP tray while feeding from the MP tray is fixed. |
BC00 | Description: Although operation was retried due to error AC00 that occurred while scanning the fax, white or black correction data for the second side CIS was not within the correct range. |
F900 | Description: The country code was not entered correctly. |
6C00 | Description: The center thermistor of the fuser unit detected a temperature higher than the specified value. |
8D00 | Description: When the power switch was turned ON, the eject sensor detected paper pass or detected that the fuser cover was open. |
9A00 | Description: There is no paper set in the MP tray while feeding from the MP tray is fixed. |
BC00 | Description: Although operation was retried due to error AC00 that occurred while scanning the fax, white or black correction data for the second side CIS was not within the correct range. |