These results are ranked by popularity.
| Error | |
|---|---|
| 6C00 | Description: The center thermistor of the fuser unit detected a temperature higher than the specified value. |
| E100 | Description: Program error |
| 9F01 | Description: The T1 paper feed sensor detected that paper has run out during faxing or printing a list or report. |
| 0B00 | Description: There was no response from the panel for the specified time for any reason. |
| AC00 | Description: When scanning the fax, white or black correction data for the second side CIS was not within the correct range. |
The most common error codes.
| Error | |
|---|---|
| 6C00 | Description: The center thermistor of the fuser unit detected a temperature higher than the specified value. |
| E100 | Description: Program error |
| 9F01 | Description: The T1 paper feed sensor detected that paper has run out during faxing or printing a list or report. |
| 0B00 | Description: There was no response from the panel for the specified time for any reason. |
| AC00 | Description: When scanning the fax, white or black correction data for the second side CIS was not within the correct range. |
| 6C00 | Description: The center thermistor of the fuser unit detected a temperature higher than the specified value. |
| E100 | Description: Program error |
| 9F01 | Description: The T1 paper feed sensor detected that paper has run out during faxing or printing a list or report. |
| 0B00 | Description: There was no response from the panel for the specified time for any reason. |
| AC00 | Description: When scanning the fax, white or black correction data for the second side CIS was not within the correct range. |
