These results are ranked by popularity.
Error | |
---|---|
E600 | Description: Write error in the EEPROM of the main PCB ASSY |
9B05 | Description: Only T4 tray is set for A4 / Letter / Legal / Folio but T4 is set as "Skip Tray". |
7601 | Description: When printing from the paper tray 4, the T4(LT or TT) paper feed sensor does not detect paper pass within the specified time while the T4(LT or TT) paper empty sensor detects some paper set. |
9002 | Description: When printing from the paper tray 1, the size of paper set in the paper tray 1 does not match the size specified by the driver. |
0503 | Description: The center thermistor of the fuser unit detected a temperature higher than the specified value. |
The most common error codes.
Error | |
---|---|
E600 | Description: Write error in the EEPROM of the main PCB ASSY |
9B05 | Description: Only T4 tray is set for A4 / Letter / Legal / Folio but T4 is set as "Skip Tray". |
7601 | Description: When printing from the paper tray 4, the T4(LT or TT) paper feed sensor does not detect paper pass within the specified time while the T4(LT or TT) paper empty sensor detects some paper set. |
9002 | Description: When printing from the paper tray 1, the size of paper set in the paper tray 1 does not match the size specified by the driver. |
0503 | Description: The center thermistor of the fuser unit detected a temperature higher than the specified value. |
E600 | Description: Write error in the EEPROM of the main PCB ASSY |
9B05 | Description: Only T4 tray is set for A4 / Letter / Legal / Folio but T4 is set as "Skip Tray". |
7601 | Description: When printing from the paper tray 4, the T4(LT or TT) paper feed sensor does not detect paper pass within the specified time while the T4(LT or TT) paper empty sensor detects some paper set. |
9002 | Description: When printing from the paper tray 1, the size of paper set in the paper tray 1 does not match the size specified by the driver. |
0503 | Description: The center thermistor of the fuser unit detected a temperature higher than the specified value. |