These results are ranked by popularity.
| Error | |
|---|---|
| 50, 51 | Description: The purge cam switch does not come ON or OFF even after the purge cam has been driven by the specified number of pulses. |
| A3 | Description: The document rear sensor does not come ON during document pull-in operation. |
| E5 | Description: Write error in EEPROM on the cordless PCB. |
| 73 | Description: Fails to switch the cap lift cam positions. |
| 88 | Description: Recording paper jam. (Even after paper pulling-in operation, the registration sensor is still OFF.) |
The most common error codes.
| Error | |
|---|---|
| 50, 51 | Description: The purge cam switch does not come ON or OFF even after the purge cam has been driven by the specified number of pulses. |
| A3 | Description: The document rear sensor does not come ON during document pull-in operation. |
| E5 | Description: Write error in EEPROM on the cordless PCB. |
| 73 | Description: Fails to switch the cap lift cam positions. |
| 88 | Description: Recording paper jam. (Even after paper pulling-in operation, the registration sensor is still OFF.) |
| 50, 51 | Description: The purge cam switch does not come ON or OFF even after the purge cam has been driven by the specified number of pulses. |
| A3 | Description: The document rear sensor does not come ON during document pull-in operation. |
| E5 | Description: Write error in EEPROM on the cordless PCB. |
| 73 | Description: Fails to switch the cap lift cam positions. |
| 88 | Description: Recording paper jam. (Even after paper pulling-in operation, the registration sensor is still OFF.) |
