These results are ranked by popularity.
Error | |
---|---|
83 | Description: Drum unit error (An drum error occurred after the drum unit reached the end of life.) |
E2 | Description: When the center thermistor is lower than the idle temperature, it is detected that the side thermistor temperature is higher than 280°C. |
59 | Description: Fuser unit error. (After the error code58 occurred, a failure in the fuser unit is detected again upon start-up.) |
A7 | Description: Scanning color parameter fille failure. |
75 | Description: Cooling down the inside of the machine to protect it. |
The most common error codes.
Error | |
---|---|
83 | Description: Drum unit error (An drum error occurred after the drum unit reached the end of life.) |
E2 | Description: When the center thermistor is lower than the idle temperature, it is detected that the side thermistor temperature is higher than 280°C. |
59 | Description: Fuser unit error. (After the error code58 occurred, a failure in the fuser unit is detected again upon start-up.) |
A7 | Description: Scanning color parameter fille failure. |
75 | Description: Cooling down the inside of the machine to protect it. |
83 | Description: Drum unit error (An drum error occurred after the drum unit reached the end of life.) |
E2 | Description: When the center thermistor is lower than the idle temperature, it is detected that the side thermistor temperature is higher than 280°C. |
59 | Description: Fuser unit error. (After the error code58 occurred, a failure in the fuser unit is detected again upon start-up.) |
A7 | Description: Scanning color parameter fille failure. |
75 | Description: Cooling down the inside of the machine to protect it. |