Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Brother MFC7860DN Top Searches

These results are ranked by popularity.

Error
E2Description: When the center thermistor is lower than the idle temperature, it is detected that the side thermistor temperature is higher than 280°C.
83Description: Drum unit error (An drum error occurred after the drum unit reached the end of life.)
A7Description: Scanning color parameter fille failure.
59Description: Fuser unit error. (After the error code58 occurred, a failure in the fuser unit is detected again upon start-up.)
75Description: Cooling down the inside of the machine to protect it.

Brother MFC7860DN Common Errors

The most common error codes.

Error
E2Description: When the center thermistor is lower than the idle temperature, it is detected that the side thermistor temperature is higher than 280°C.
83Description: Drum unit error (An drum error occurred after the drum unit reached the end of life.)
A7Description: Scanning color parameter fille failure.
59Description: Fuser unit error. (After the error code58 occurred, a failure in the fuser unit is detected again upon start-up.)
75Description: Cooling down the inside of the machine to protect it.
E2Description: When the center thermistor is lower than the idle temperature, it is detected that the side thermistor temperature is higher than 280°C.
83Description: Drum unit error (An drum error occurred after the drum unit reached the end of life.)
A7Description: Scanning color parameter fille failure.
59Description: Fuser unit error. (After the error code58 occurred, a failure in the fuser unit is detected again upon start-up.)
75Description: Cooling down the inside of the machine to protect it.