Brother MFC7362N Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Brother MFC7362N Top Searches

These results are ranked by popularity.

Error
8ADescription: Paper jam in the paper tray1.
36Description: Error in the high voltage power suply PCB while the machine is in the standby mode.
E2Description: When the center thermistor is lower than the idle temperature, it is detected that the side thermistor temperature is higher than 280°C.
6BDescription: Fuser unit error. (The center thermistor does not detect 100°C within in the specified time.)
A7Description: Scanning color parameter fille failure.

Brother MFC7362N Common Errors

The most common error codes.

Error
8ADescription: Paper jam in the paper tray1.
36Description: Error in the high voltage power suply PCB while the machine is in the standby mode.
E2Description: When the center thermistor is lower than the idle temperature, it is detected that the side thermistor temperature is higher than 280°C.
6BDescription: Fuser unit error. (The center thermistor does not detect 100°C within in the specified time.)
A7Description: Scanning color parameter fille failure.
8ADescription: Paper jam in the paper tray1.
36Description: Error in the high voltage power suply PCB while the machine is in the standby mode.
E2Description: When the center thermistor is lower than the idle temperature, it is detected that the side thermistor temperature is higher than 280°C.
6BDescription: Fuser unit error. (The center thermistor does not detect 100°C within in the specified time.)
A7Description: Scanning color parameter fille failure.