These results are ranked by popularity.
| Error | |
|---|---|
| A1 | Description: Top cover or control panel opened. |
| 41 | Description: The head drive voltage has not been turned from Low to High within the specified time. |
| E8 | Description: Data scanning error during transmission. |
| 51 | Description: The purge cam HP switch does not go OFF even after the purge cam has been driven by the specified number of pulses. |
| 25 | Description: Ink cartridges had already been loaded when the power was first applied. |
The most common error codes.
| Error | |
|---|---|
| A1 | Description: Top cover or control panel opened. |
| 41 | Description: The head drive voltage has not been turned from Low to High within the specified time. |
| E8 | Description: Data scanning error during transmission. |
| 51 | Description: The purge cam HP switch does not go OFF even after the purge cam has been driven by the specified number of pulses. |
| 25 | Description: Ink cartridges had already been loaded when the power was first applied. |
| A1 | Description: Top cover or control panel opened. |
| 41 | Description: The head drive voltage has not been turned from Low to High within the specified time. |
| E8 | Description: Data scanning error during transmission. |
| 51 | Description: The purge cam HP switch does not go OFF even after the purge cam has been driven by the specified number of pulses. |
| 25 | Description: Ink cartridges had already been loaded when the power was first applied. |
