These results are ranked by popularity.
Error | |
---|---|
1808 | Description: A communication error occurred between the ASIC and TT control PCB in the engine. |
9B03 | Description: Only T2 tray is set for A4 / Letter / Legal / Folio but T2 is set as "Skip Tray". |
BF00 | Description: The document scanning position sensor detected that the document length was 400 mm or longer and could not be fed to ADF (double-side restoration). |
7301 | Description: When printing from the paper tray 1, the T1 paper feed sensor does not detect paper pass within the specified time while the T1 paper empty sensor detects some paper set. |
EE00 | Description: Failed to authenticate the NVRAM for the self test. |
The most common error codes.
Error | |
---|---|
1808 | Description: A communication error occurred between the ASIC and TT control PCB in the engine. |
9B03 | Description: Only T2 tray is set for A4 / Letter / Legal / Folio but T2 is set as "Skip Tray". |
BF00 | Description: The document scanning position sensor detected that the document length was 400 mm or longer and could not be fed to ADF (double-side restoration). |
7301 | Description: When printing from the paper tray 1, the T1 paper feed sensor does not detect paper pass within the specified time while the T1 paper empty sensor detects some paper set. |
EE00 | Description: Failed to authenticate the NVRAM for the self test. |
1808 | Description: A communication error occurred between the ASIC and TT control PCB in the engine. |
9B03 | Description: Only T2 tray is set for A4 / Letter / Legal / Folio but T2 is set as "Skip Tray". |
BF00 | Description: The document scanning position sensor detected that the document length was 400 mm or longer and could not be fed to ADF (double-side restoration). |
7301 | Description: When printing from the paper tray 1, the T1 paper feed sensor does not detect paper pass within the specified time while the T1 paper empty sensor detects some paper set. |
EE00 | Description: Failed to authenticate the NVRAM for the self test. |