These results are ranked by popularity.
Error | |
---|---|
6901 | Description: An error occurred in the fuser unit when the power switch was turned ON or sleep mode was released. |
050B | Description: When the center thermistor of the fuser unit was lower than the idle temperature, the side thermistor detected a temperature higher than the specified temperature. |
E702 | Description: Read error in the flash ROM |
A000 | Description: Image processing was not completed correctly because the number of pixels required for image processing is insufficient in the scanned second side data. |
8E02 | Description: Detected that the size of the paper set to paper tray was over 10 mm shorter than letter size when receiving fax or printing a list/report. |
The most common error codes.
Error | |
---|---|
6901 | Description: An error occurred in the fuser unit when the power switch was turned ON or sleep mode was released. |
050B | Description: When the center thermistor of the fuser unit was lower than the idle temperature, the side thermistor detected a temperature higher than the specified temperature. |
E702 | Description: Read error in the flash ROM |
A000 | Description: Image processing was not completed correctly because the number of pixels required for image processing is insufficient in the scanned second side data. |
8E02 | Description: Detected that the size of the paper set to paper tray was over 10 mm shorter than letter size when receiving fax or printing a list/report. |
6901 | Description: An error occurred in the fuser unit when the power switch was turned ON or sleep mode was released. |
050B | Description: When the center thermistor of the fuser unit was lower than the idle temperature, the side thermistor detected a temperature higher than the specified temperature. |
E702 | Description: Read error in the flash ROM |
A000 | Description: Image processing was not completed correctly because the number of pixels required for image processing is insufficient in the scanned second side data. |
8E02 | Description: Detected that the size of the paper set to paper tray was over 10 mm shorter than letter size when receiving fax or printing a list/report. |