These results are ranked by popularity.
Error | |
---|---|
6004 | Description: The eject sensor detected that the fuser cover was open. |
0505 | Description: The center thermistor of the fuser unit detected a temperature rise greater than the specified value within the specified time. |
E100 | Description: Program error |
9B03 | Description: Only T2 tray is set for A4 / Letter / Legal / Folio but T2 is set as "Skip Tray". |
8903 | Description: The back cover/duplex tray sensor detected that the cover was open when duplex printing is started. (Before registering printing data to engine) |
The most common error codes.
Error | |
---|---|
6004 | Description: The eject sensor detected that the fuser cover was open. |
0505 | Description: The center thermistor of the fuser unit detected a temperature rise greater than the specified value within the specified time. |
E100 | Description: Program error |
9B03 | Description: Only T2 tray is set for A4 / Letter / Legal / Folio but T2 is set as "Skip Tray". |
8903 | Description: The back cover/duplex tray sensor detected that the cover was open when duplex printing is started. (Before registering printing data to engine) |
6004 | Description: The eject sensor detected that the fuser cover was open. |
0505 | Description: The center thermistor of the fuser unit detected a temperature rise greater than the specified value within the specified time. |
E100 | Description: Program error |
9B03 | Description: Only T2 tray is set for A4 / Letter / Legal / Folio but T2 is set as "Skip Tray". |
8903 | Description: The back cover/duplex tray sensor detected that the cover was open when duplex printing is started. (Before registering printing data to engine) |