Brother DCP-L6600DW Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Brother DCP-L6600DW Top Searches

These results are ranked by popularity.

Error
1808Description: A communication error occurred between the ASIC and TT control PCB in the engine.
AE00Description: Unit home position could not be detected after the power switch was turned ON.
9204Description: When printing from the paper tray 3, paper type setting in the machine does not match the setting in the driver.
7401Description: When printing from the paper tray 2, the T2(LT or TT) paper feed sensor does not detect paper pass within the specified time while the T2(LT or TT) paper empty sensor detects some paper set.
0305Description: Cannot detect the lock signal of the polygon motor for the laser unit (first time).

Brother DCP-L6600DW Common Errors

The most common error codes.

Error
1808Description: A communication error occurred between the ASIC and TT control PCB in the engine.
AE00Description: Unit home position could not be detected after the power switch was turned ON.
9204Description: When printing from the paper tray 3, paper type setting in the machine does not match the setting in the driver.
7401Description: When printing from the paper tray 2, the T2(LT or TT) paper feed sensor does not detect paper pass within the specified time while the T2(LT or TT) paper empty sensor detects some paper set.
0305Description: Cannot detect the lock signal of the polygon motor for the laser unit (first time).
1808Description: A communication error occurred between the ASIC and TT control PCB in the engine.
AE00Description: Unit home position could not be detected after the power switch was turned ON.
9204Description: When printing from the paper tray 3, paper type setting in the machine does not match the setting in the driver.
7401Description: When printing from the paper tray 2, the T2(LT or TT) paper feed sensor does not detect paper pass within the specified time while the T2(LT or TT) paper empty sensor detects some paper set.
0305Description: Cannot detect the lock signal of the polygon motor for the laser unit (first time).