These results are ranked by popularity.
Error | |
---|---|
0503 | Description: The center thermistor of the fuser unit detected a temperature higher than the specified value. |
8903 | Description: The back cover/duplex tray sensor detected that the cover was open when duplex printing is started. (Before registering printing data to engine) |
9302 | Description: When printing from paper tray 1, the T1 paper empty sensor or the T1 paper feed sensor detected that there was no paper set in paper tray 1. |
5005 | Description: Printable pages set for PF kit 4 have reached the upper limit. |
9705 | Description: When printing from paper tray 4, a paper size not supported for paper tray 4 was specified from the driver. |
The most common error codes.
Error | |
---|---|
0503 | Description: The center thermistor of the fuser unit detected a temperature higher than the specified value. |
8903 | Description: The back cover/duplex tray sensor detected that the cover was open when duplex printing is started. (Before registering printing data to engine) |
9302 | Description: When printing from paper tray 1, the T1 paper empty sensor or the T1 paper feed sensor detected that there was no paper set in paper tray 1. |
5005 | Description: Printable pages set for PF kit 4 have reached the upper limit. |
9705 | Description: When printing from paper tray 4, a paper size not supported for paper tray 4 was specified from the driver. |
0503 | Description: The center thermistor of the fuser unit detected a temperature higher than the specified value. |
8903 | Description: The back cover/duplex tray sensor detected that the cover was open when duplex printing is started. (Before registering printing data to engine) |
9302 | Description: When printing from paper tray 1, the T1 paper empty sensor or the T1 paper feed sensor detected that there was no paper set in paper tray 1. |
5005 | Description: Printable pages set for PF kit 4 have reached the upper limit. |
9705 | Description: When printing from paper tray 4, a paper size not supported for paper tray 4 was specified from the driver. |