These results are ranked by popularity.
| Error | |
|---|---|
| 7B03 | Description: The MX 2bin stack sensor does not detect paper pass within the specified time after the MX jam lower sensor detected paper pass. |
| 5001 | Description: Printable pages set for PF kit MP have reached the upper limit. |
| 0501 | Description: The center thermistor of the fuser unit has not reached the specified temperature within the specified time. |
| D800 | Description: An error occurred while initializing the touch panel. |
| 9003 | Description: When printing from the paper tray 2, the size of paper set in the paper tray 2 does not match the size specified by the driver. |
The most common error codes.
| Error | |
|---|---|
| 7B03 | Description: The MX 2bin stack sensor does not detect paper pass within the specified time after the MX jam lower sensor detected paper pass. |
| 5001 | Description: Printable pages set for PF kit MP have reached the upper limit. |
| 0501 | Description: The center thermistor of the fuser unit has not reached the specified temperature within the specified time. |
| D800 | Description: An error occurred while initializing the touch panel. |
| 9003 | Description: When printing from the paper tray 2, the size of paper set in the paper tray 2 does not match the size specified by the driver. |
| 7B03 | Description: The MX 2bin stack sensor does not detect paper pass within the specified time after the MX jam lower sensor detected paper pass. |
| 5001 | Description: Printable pages set for PF kit MP have reached the upper limit. |
| 0501 | Description: The center thermistor of the fuser unit has not reached the specified temperature within the specified time. |
| D800 | Description: An error occurred while initializing the touch panel. |
| 9003 | Description: When printing from the paper tray 2, the size of paper set in the paper tray 2 does not match the size specified by the driver. |
