These results are ranked by popularity.
Error | |
---|---|
9306 | Description: When printing from paper tray 5, the T5TT paper empty sensor detected that there was no paper set in paper tray 5. |
870A | Description: MX 3bin stack sensor detected the eject paper full state at the start of printing when the MX 3bin was selected as the output tray. |
7000 | Description: The eject sensor does not detect paper pass after the registration rear sensor detected the paper pass. |
1801 | Description: A communication error occurred between the ASIC and T2LT control PCB in the engine. (LT only) |
7701 | Description: When printing from the paper tray 5, the T5TT paper feed sensor does not detect paper pass within the specified time while the T5TT paper empty sensor detects some paper set. |
The most common error codes.
Error | |
---|---|
9306 | Description: When printing from paper tray 5, the T5TT paper empty sensor detected that there was no paper set in paper tray 5. |
870A | Description: MX 3bin stack sensor detected the eject paper full state at the start of printing when the MX 3bin was selected as the output tray. |
7000 | Description: The eject sensor does not detect paper pass after the registration rear sensor detected the paper pass. |
1801 | Description: A communication error occurred between the ASIC and T2LT control PCB in the engine. (LT only) |
7701 | Description: When printing from the paper tray 5, the T5TT paper feed sensor does not detect paper pass within the specified time while the T5TT paper empty sensor detects some paper set. |
9306 | Description: When printing from paper tray 5, the T5TT paper empty sensor detected that there was no paper set in paper tray 5. |
870A | Description: MX 3bin stack sensor detected the eject paper full state at the start of printing when the MX 3bin was selected as the output tray. |
7000 | Description: The eject sensor does not detect paper pass after the registration rear sensor detected the paper pass. |
1801 | Description: A communication error occurred between the ASIC and T2LT control PCB in the engine. (LT only) |
7701 | Description: When printing from the paper tray 5, the T5TT paper feed sensor does not detect paper pass within the specified time while the T5TT paper empty sensor detects some paper set. |