These results are ranked by popularity.
| Error | |
|---|---|
| 9B05 | Description: Only T4 tray is set for A4 / Letter / Legal / Folio but T4 is set as "Skip Tray". |
| 8A01 | Description: The registration rear sensor detected that the paper fed was smaller or larger than the specified size in duplex printing mode. |
| 6200 | Description: Detected that the drum unit was not set by detecting the GRID terminal current. |
| 0508 | Description: The side thermistor of the fuser unit did not detect a temperature rise when the heater was ON. |
| E600 | Description: Write error in the EEPROM of the main PCB ASSY |
The most common error codes.
| Error | |
|---|---|
| 9B05 | Description: Only T4 tray is set for A4 / Letter / Legal / Folio but T4 is set as "Skip Tray". |
| 8A01 | Description: The registration rear sensor detected that the paper fed was smaller or larger than the specified size in duplex printing mode. |
| 6200 | Description: Detected that the drum unit was not set by detecting the GRID terminal current. |
| 0508 | Description: The side thermistor of the fuser unit did not detect a temperature rise when the heater was ON. |
| E600 | Description: Write error in the EEPROM of the main PCB ASSY |
| 9B05 | Description: Only T4 tray is set for A4 / Letter / Legal / Folio but T4 is set as "Skip Tray". |
| 8A01 | Description: The registration rear sensor detected that the paper fed was smaller or larger than the specified size in duplex printing mode. |
| 6200 | Description: Detected that the drum unit was not set by detecting the GRID terminal current. |
| 0508 | Description: The side thermistor of the fuser unit did not detect a temperature rise when the heater was ON. |
| E600 | Description: Write error in the EEPROM of the main PCB ASSY |
