These results are ranked by popularity.
| Error | |
|---|---|
| 9701 | Description: A tray set to duplex printing-incompatible size was specified in duplex printing. |
| AE00 | Description: Unit home position could not be detected after the power switch was turned ON. |
| 7601 | Description: When printing from the paper tray 4, the T4(LT or TT) paper feed sensor does not detect paper pass within the specified time while the T4(LT or TT) paper empty sensor detects some paper set. |
| 0503 | Description: The center thermistor of the fuser unit detected a temperature higher than the specified value. |
| C100 | Description: Failed to save data to a USB flash memory. |
The most common error codes.
| Error | |
|---|---|
| 9701 | Description: A tray set to duplex printing-incompatible size was specified in duplex printing. |
| AE00 | Description: Unit home position could not be detected after the power switch was turned ON. |
| 7601 | Description: When printing from the paper tray 4, the T4(LT or TT) paper feed sensor does not detect paper pass within the specified time while the T4(LT or TT) paper empty sensor detects some paper set. |
| 0503 | Description: The center thermistor of the fuser unit detected a temperature higher than the specified value. |
| C100 | Description: Failed to save data to a USB flash memory. |
| 9701 | Description: A tray set to duplex printing-incompatible size was specified in duplex printing. |
| AE00 | Description: Unit home position could not be detected after the power switch was turned ON. |
| 7601 | Description: When printing from the paper tray 4, the T4(LT or TT) paper feed sensor does not detect paper pass within the specified time while the T4(LT or TT) paper empty sensor detects some paper set. |
| 0503 | Description: The center thermistor of the fuser unit detected a temperature higher than the specified value. |
| C100 | Description: Failed to save data to a USB flash memory. |
