Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Brother DCP-L5502DN Top Searches

These results are ranked by popularity.

Error
8E02Description: Detected that the size of the paper set to paper tray was over 10 mm shorter than letter size when receiving fax or printing a list/report.
0501Description: The center thermistor of the fuser unit has not reached the specified temperature within the specified time.
C004Description: Cannot acquire current time which is required for user authentication because the time has not been acquired.
7501Description: When printing from the paper tray 3, the T3(LT or TT) paper feed sensor does not detect paper pass within the specified time while the T3(LT or TT) paper empty sensor detects some paper set.
E701Description: System error in the flash ROM

Brother DCP-L5502DN Common Errors

The most common error codes.

Error
8E02Description: Detected that the size of the paper set to paper tray was over 10 mm shorter than letter size when receiving fax or printing a list/report.
0501Description: The center thermistor of the fuser unit has not reached the specified temperature within the specified time.
C004Description: Cannot acquire current time which is required for user authentication because the time has not been acquired.
7501Description: When printing from the paper tray 3, the T3(LT or TT) paper feed sensor does not detect paper pass within the specified time while the T3(LT or TT) paper empty sensor detects some paper set.
E701Description: System error in the flash ROM
8E02Description: Detected that the size of the paper set to paper tray was over 10 mm shorter than letter size when receiving fax or printing a list/report.
0501Description: The center thermistor of the fuser unit has not reached the specified temperature within the specified time.
C004Description: Cannot acquire current time which is required for user authentication because the time has not been acquired.
7501Description: When printing from the paper tray 3, the T3(LT or TT) paper feed sensor does not detect paper pass within the specified time while the T3(LT or TT) paper empty sensor detects some paper set.
E701Description: System error in the flash ROM