Brother HL-L5200DW Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Brother HL-L5200DW Top Searches

These results are ranked by popularity.

Error
1801Description: A communication error occurred between the ASIC and T2LT control PCB in the engine. (LT only)
9001Description: When printing from the MP tray, the size of paper set in the MP tray does not match the size specified by the driver.
7602Description: When printing from the paper tray 4, the registration front sensor or the T2/T3/T4TT jam sensor does not detect paper pass within the specified time after the T4(LT or TT) paper feed sensor detected paper pass.
9302Description: When printing from paper tray 1, the T1 paper empty sensor or the T1 paper feed sensor detected that there was no paper set in paper tray 1.
4500Description: The number of printable pages of the fuser unit has reached the upper limit.

Brother HL-L5200DW Common Errors

The most common error codes.

Error
1801Description: A communication error occurred between the ASIC and T2LT control PCB in the engine. (LT only)
9001Description: When printing from the MP tray, the size of paper set in the MP tray does not match the size specified by the driver.
7602Description: When printing from the paper tray 4, the registration front sensor or the T2/T3/T4TT jam sensor does not detect paper pass within the specified time after the T4(LT or TT) paper feed sensor detected paper pass.
9302Description: When printing from paper tray 1, the T1 paper empty sensor or the T1 paper feed sensor detected that there was no paper set in paper tray 1.
4500Description: The number of printable pages of the fuser unit has reached the upper limit.
1801Description: A communication error occurred between the ASIC and T2LT control PCB in the engine. (LT only)
9001Description: When printing from the MP tray, the size of paper set in the MP tray does not match the size specified by the driver.
7602Description: When printing from the paper tray 4, the registration front sensor or the T2/T3/T4TT jam sensor does not detect paper pass within the specified time after the T4(LT or TT) paper feed sensor detected paper pass.
9302Description: When printing from paper tray 1, the T1 paper empty sensor or the T1 paper feed sensor detected that there was no paper set in paper tray 1.
4500Description: The number of printable pages of the fuser unit has reached the upper limit.