Brother HL-L5000D Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Brother HL-L5000D Top Searches

These results are ranked by popularity.

Error
7000Description: The eject sensor does not detect paper pass after the registration rear sensor detected the paper pass.
0505Description: The center thermistor of the fuser unit detected a temperature rise greater than the specified value within the specified time.
870EDescription: Machine stack sensor or MX 3bin stack sensor detected the eject paper full state at the start of printing when the MX 3bin was selected as the output tray and "Use Std. Tray when full" setting was ON.
9704Description: When printing from paper tray 3, a paper size not supported for paper tray 3 was specified from the driver.
1701Description: Detected a TT fan failure.

Brother HL-L5000D Common Errors

The most common error codes.

Error
7000Description: The eject sensor does not detect paper pass after the registration rear sensor detected the paper pass.
0505Description: The center thermistor of the fuser unit detected a temperature rise greater than the specified value within the specified time.
870EDescription: Machine stack sensor or MX 3bin stack sensor detected the eject paper full state at the start of printing when the MX 3bin was selected as the output tray and "Use Std. Tray when full" setting was ON.
9704Description: When printing from paper tray 3, a paper size not supported for paper tray 3 was specified from the driver.
1701Description: Detected a TT fan failure.
7000Description: The eject sensor does not detect paper pass after the registration rear sensor detected the paper pass.
0505Description: The center thermistor of the fuser unit detected a temperature rise greater than the specified value within the specified time.
870EDescription: Machine stack sensor or MX 3bin stack sensor detected the eject paper full state at the start of printing when the MX 3bin was selected as the output tray and "Use Std. Tray when full" setting was ON.
9704Description: When printing from paper tray 3, a paper size not supported for paper tray 3 was specified from the driver.
1701Description: Detected a TT fan failure.