These results are ranked by popularity.
| Error | |
|---|---|
| 9001 | Description: The size of paper loaded in the MP tray and the one specified from the driver are not same when paper is fed from the MP tray. |
| 0506 | Description: The center thermistor of the fuser unit detected a temperature fall greater than the specified value within the specified time. |
| E500 | Description: An error occurred during access to the DRAM in the main PCB ASSY. |
| A300 | Description: The document scanning position sensor has not detected the document passing even after the document has been fed for the specified time. |
| 6001 | Description: The front cover sensor detected that the front cover was open. |
The most common error codes.
| Error | |
|---|---|
| 9001 | Description: The size of paper loaded in the MP tray and the one specified from the driver are not same when paper is fed from the MP tray. |
| 0506 | Description: The center thermistor of the fuser unit detected a temperature fall greater than the specified value within the specified time. |
| E500 | Description: An error occurred during access to the DRAM in the main PCB ASSY. |
| A300 | Description: The document scanning position sensor has not detected the document passing even after the document has been fed for the specified time. |
| 6001 | Description: The front cover sensor detected that the front cover was open. |
| 9001 | Description: The size of paper loaded in the MP tray and the one specified from the driver are not same when paper is fed from the MP tray. |
| 0506 | Description: The center thermistor of the fuser unit detected a temperature fall greater than the specified value within the specified time. |
| E500 | Description: An error occurred during access to the DRAM in the main PCB ASSY. |
| A300 | Description: The document scanning position sensor has not detected the document passing even after the document has been fed for the specified time. |
| 6001 | Description: The front cover sensor detected that the front cover was open. |
