These results are ranked by popularity.
| Error | |
|---|---|
| 4F01 | Description: The new toner sensor of the toner cartridge could not detect a new cartridge properly. |
| 0201 | Description: Cannot detect the synchronized signal of the paper feed motor. The speed of the paper feed motor does not stabilize within the specified time. |
| 9301 | Description: When paper was fed from the MP tray, the MP paper empty sensor detected that no paper was in the MP tray. |
| AF00 | Description: Home position is still being detected even after the first side CIS unit was moved. |
| 0508 | Description: Temperature of the end part didn’t rise by 1 °C when the fuser unit heater was turned ON. |
The most common error codes.
| Error | |
|---|---|
| 4F01 | Description: The new toner sensor of the toner cartridge could not detect a new cartridge properly. |
| 0201 | Description: Cannot detect the synchronized signal of the paper feed motor. The speed of the paper feed motor does not stabilize within the specified time. |
| 9301 | Description: When paper was fed from the MP tray, the MP paper empty sensor detected that no paper was in the MP tray. |
| AF00 | Description: Home position is still being detected even after the first side CIS unit was moved. |
| 0508 | Description: Temperature of the end part didn’t rise by 1 °C when the fuser unit heater was turned ON. |
| 4F01 | Description: The new toner sensor of the toner cartridge could not detect a new cartridge properly. |
| 0201 | Description: Cannot detect the synchronized signal of the paper feed motor. The speed of the paper feed motor does not stabilize within the specified time. |
| 9301 | Description: When paper was fed from the MP tray, the MP paper empty sensor detected that no paper was in the MP tray. |
| AF00 | Description: Home position is still being detected even after the first side CIS unit was moved. |
| 0508 | Description: Temperature of the end part didn’t rise by 1 °C when the fuser unit heater was turned ON. |
