These results are ranked by popularity.
Error | |
---|---|
A600 | Description: When scanning the fax, white or black correction data for the first side CIS unit was not within the correct range (second time). |
E701 | Description: System error in the flash ROM |
6106 | Description: The new toner box sensor detected that no toner box was set. |
4C01 | Description: Dot count or develop roller counter of the toner cartridge in models without toner box has reached the upper limit in the toner stop mode. |
0503 | Description: The center thermistor of the fuser unit detected a temperature higher than the specified value. |
The most common error codes.
Error | |
---|---|
A600 | Description: When scanning the fax, white or black correction data for the first side CIS unit was not within the correct range (second time). |
E701 | Description: System error in the flash ROM |
6106 | Description: The new toner box sensor detected that no toner box was set. |
4C01 | Description: Dot count or develop roller counter of the toner cartridge in models without toner box has reached the upper limit in the toner stop mode. |
0503 | Description: The center thermistor of the fuser unit detected a temperature higher than the specified value. |
A600 | Description: When scanning the fax, white or black correction data for the first side CIS unit was not within the correct range (second time). |
E701 | Description: System error in the flash ROM |
6106 | Description: The new toner box sensor detected that no toner box was set. |
4C01 | Description: Dot count or develop roller counter of the toner cartridge in models without toner box has reached the upper limit in the toner stop mode. |
0503 | Description: The center thermistor of the fuser unit detected a temperature higher than the specified value. |