Brother DCP-L2536D Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Brother DCP-L2536D Top Searches

These results are ranked by popularity.

Error
7100Description: After the registration rear sensor detects the end of paper pass and the specified period of time has passed, the eject sensor continues to detect paper pass.
E000Description: An error occurred in the ROM check sum.
4B01Description: Dot counter of the toner cartridge or develop roller counter reaches the upper limit soon.
9002Description: The size of paper loaded in the paper tray and the one specified from the driver are not same when paper is fed from the paper tray.
0501Description: The center thermistor of the fuser unit has not reached the specified temperature within the specified time.

Brother DCP-L2536D Common Errors

The most common error codes.

Error
7100Description: After the registration rear sensor detects the end of paper pass and the specified period of time has passed, the eject sensor continues to detect paper pass.
E000Description: An error occurred in the ROM check sum.
4B01Description: Dot counter of the toner cartridge or develop roller counter reaches the upper limit soon.
9002Description: The size of paper loaded in the paper tray and the one specified from the driver are not same when paper is fed from the paper tray.
0501Description: The center thermistor of the fuser unit has not reached the specified temperature within the specified time.
7100Description: After the registration rear sensor detects the end of paper pass and the specified period of time has passed, the eject sensor continues to detect paper pass.
E000Description: An error occurred in the ROM check sum.
4B01Description: Dot counter of the toner cartridge or develop roller counter reaches the upper limit soon.
9002Description: The size of paper loaded in the paper tray and the one specified from the driver are not same when paper is fed from the paper tray.
0501Description: The center thermistor of the fuser unit has not reached the specified temperature within the specified time.