Brother DCP-L2535DW Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Brother DCP-L2535DW Top Searches

These results are ranked by popularity.

Error
E900Description: An error occurred while initializing the NFC.
9301Description: When paper was fed from the MP tray, the MP paper empty sensor detected that no paper was in the MP tray.
4C01Description: Dot count or develop roller counter of the toner cartridge in models without toner box has reached the upper limit in the toner stop mode.
6200Description: Detected that the drum unit was not set by detecting the electrodes current.
0503Description: The center thermistor of the fuser unit detected a temperature higher than the specified value.

Brother DCP-L2535DW Common Errors

The most common error codes.

Error
E900Description: An error occurred while initializing the NFC.
9301Description: When paper was fed from the MP tray, the MP paper empty sensor detected that no paper was in the MP tray.
4C01Description: Dot count or develop roller counter of the toner cartridge in models without toner box has reached the upper limit in the toner stop mode.
6200Description: Detected that the drum unit was not set by detecting the electrodes current.
0503Description: The center thermistor of the fuser unit detected a temperature higher than the specified value.
E900Description: An error occurred while initializing the NFC.
9301Description: When paper was fed from the MP tray, the MP paper empty sensor detected that no paper was in the MP tray.
4C01Description: Dot count or develop roller counter of the toner cartridge in models without toner box has reached the upper limit in the toner stop mode.
6200Description: Detected that the drum unit was not set by detecting the electrodes current.
0503Description: The center thermistor of the fuser unit detected a temperature higher than the specified value.