These results are ranked by popularity.
Error | |
---|---|
0305 | Description: Cannot detect the lock signal of the polygon motor for the laser unit. (first time) |
6902 | Description: After the error was detected at the fuser unit, power was turned ON again and the error is being checked. (If power is turned OFF and ON after error code 6901 occurred, this code is displayed for about 15 minutes.) |
E900 | Description: An error occurred while initializing the NFC. |
5E00 | Description: New toner box sensor could not detect the new toner box correctly. |
8C00 | Description: There is no paper set in the manual feed slot on the manual feed slot printing. |
The most common error codes.
Error | |
---|---|
0305 | Description: Cannot detect the lock signal of the polygon motor for the laser unit. (first time) |
6902 | Description: After the error was detected at the fuser unit, power was turned ON again and the error is being checked. (If power is turned OFF and ON after error code 6901 occurred, this code is displayed for about 15 minutes.) |
E900 | Description: An error occurred while initializing the NFC. |
5E00 | Description: New toner box sensor could not detect the new toner box correctly. |
8C00 | Description: There is no paper set in the manual feed slot on the manual feed slot printing. |
0305 | Description: Cannot detect the lock signal of the polygon motor for the laser unit. (first time) |
6902 | Description: After the error was detected at the fuser unit, power was turned ON again and the error is being checked. (If power is turned OFF and ON after error code 6901 occurred, this code is displayed for about 15 minutes.) |
E900 | Description: An error occurred while initializing the NFC. |
5E00 | Description: New toner box sensor could not detect the new toner box correctly. |
8C00 | Description: There is no paper set in the manual feed slot on the manual feed slot printing. |