These results are ranked by popularity.
Error | |
---|---|
4C01 | Description: Dot count or develop roller counter of the toner cartridge in models without toner box has reached the upper limit in the toner stop mode. |
7302 | Description: When printing from the paper tray, the registration front sensor does not detect paper pass within the specified time after the T1 paper feed sensor detected paper pass. |
9202 | Description: When printing from the paper tray, paper type setting in the machine does not match the setting in the driver. |
BD00 | Description: A black level not within the standard was scanned when function code 55 was executed. |
0503 | Description: The center thermistor of the fuser unit detected a temperature higher than the specified value. |
The most common error codes.
Error | |
---|---|
4C01 | Description: Dot count or develop roller counter of the toner cartridge in models without toner box has reached the upper limit in the toner stop mode. |
7302 | Description: When printing from the paper tray, the registration front sensor does not detect paper pass within the specified time after the T1 paper feed sensor detected paper pass. |
9202 | Description: When printing from the paper tray, paper type setting in the machine does not match the setting in the driver. |
BD00 | Description: A black level not within the standard was scanned when function code 55 was executed. |
0503 | Description: The center thermistor of the fuser unit detected a temperature higher than the specified value. |
4C01 | Description: Dot count or develop roller counter of the toner cartridge in models without toner box has reached the upper limit in the toner stop mode. |
7302 | Description: When printing from the paper tray, the registration front sensor does not detect paper pass within the specified time after the T1 paper feed sensor detected paper pass. |
9202 | Description: When printing from the paper tray, paper type setting in the machine does not match the setting in the driver. |
BD00 | Description: A black level not within the standard was scanned when function code 55 was executed. |
0503 | Description: The center thermistor of the fuser unit detected a temperature higher than the specified value. |