Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Brother MFC-J6910DW Top Searches

These results are ranked by popularity.

Error
30Description: Carriage motor does not rotate. (Detected by the CR encoder)
82Description: Recording paper jam in paper feeding. (The paper width sensor has failed to detect the leading edge of paper.)
43Description: Head thermistor defective. (Detects -20C or below or 80C or higher when the power is turned on)
A3Description: The document scanning position sensor (for first side scanning) or the one (for second side scanning) does not come ON during ADF scanning.
0DDescription: In duplex printing, a recording paper jam has occurred. (The switchback paper sensor does not come ON within the specified paper feeding amount after the start of switchbacking.)

Brother MFC-J6910DW Common Errors

The most common error codes.

Error
30Description: Carriage motor does not rotate. (Detected by the CR encoder)
82Description: Recording paper jam in paper feeding. (The paper width sensor has failed to detect the leading edge of paper.)
43Description: Head thermistor defective. (Detects -20C or below or 80C or higher when the power is turned on)
A3Description: The document scanning position sensor (for first side scanning) or the one (for second side scanning) does not come ON during ADF scanning.
0DDescription: In duplex printing, a recording paper jam has occurred. (The switchback paper sensor does not come ON within the specified paper feeding amount after the start of switchbacking.)
30Description: Carriage motor does not rotate. (Detected by the CR encoder)
82Description: Recording paper jam in paper feeding. (The paper width sensor has failed to detect the leading edge of paper.)
43Description: Head thermistor defective. (Detects -20C or below or 80C or higher when the power is turned on)
A3Description: The document scanning position sensor (for first side scanning) or the one (for second side scanning) does not come ON during ADF scanning.
0DDescription: In duplex printing, a recording paper jam has occurred. (The switchback paper sensor does not come ON within the specified paper feeding amount after the start of switchbacking.)