Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Brother HL5580D Top Searches

These results are ranked by popularity.

Error
9206Description: When printing from the paper tray 5, paper type setting in the machine does not match the setting in the driver.
8507Description: When printing from paper tray 3, 4 or 5, the T3(LT or TT) paper feed sensor detected open paper tray 3 (after registering printing data to engine).
6801Description: The side thermistor of the fuser unit or internal temperature sensor detected a temperature higher than the specified value.
0800Description: An error occurred in the internal temperature sensor.
870FDescription: Machine stack sensor or MX 4bin stack sensor detected the eject paper full state at the start of printing when the MX 4bin was selected as the output tray and "Use Std. Tray when full" setting was ON.

Brother HL5580D Common Errors

The most common error codes.

Error
9206Description: When printing from the paper tray 5, paper type setting in the machine does not match the setting in the driver.
8507Description: When printing from paper tray 3, 4 or 5, the T3(LT or TT) paper feed sensor detected open paper tray 3 (after registering printing data to engine).
6801Description: The side thermistor of the fuser unit or internal temperature sensor detected a temperature higher than the specified value.
0800Description: An error occurred in the internal temperature sensor.
870FDescription: Machine stack sensor or MX 4bin stack sensor detected the eject paper full state at the start of printing when the MX 4bin was selected as the output tray and "Use Std. Tray when full" setting was ON.
9206Description: When printing from the paper tray 5, paper type setting in the machine does not match the setting in the driver.
8507Description: When printing from paper tray 3, 4 or 5, the T3(LT or TT) paper feed sensor detected open paper tray 3 (after registering printing data to engine).
6801Description: The side thermistor of the fuser unit or internal temperature sensor detected a temperature higher than the specified value.
0800Description: An error occurred in the internal temperature sensor.
870FDescription: Machine stack sensor or MX 4bin stack sensor detected the eject paper full state at the start of printing when the MX 4bin was selected as the output tray and "Use Std. Tray when full" setting was ON.