These results are ranked by popularity.
Error | |
---|---|
D1 | Description: The MODEM setup bit sticks to High. |
EA | Description: Document removed at phase B. |
89 | Description: Cutter jam. |
A9 | Description: Abnormal scanning reference voltage. |
D2 | Description: CTS stays OFF or ON if the MODEM RTS is turned ON or OFF, respectively. |
The most common error codes.
Error | |
---|---|
D1 | Description: The MODEM setup bit sticks to High. |
EA | Description: Document removed at phase B. |
89 | Description: Cutter jam. |
A9 | Description: Abnormal scanning reference voltage. |
D2 | Description: CTS stays OFF or ON if the MODEM RTS is turned ON or OFF, respectively. |
D1 | Description: The MODEM setup bit sticks to High. |
EA | Description: Document removed at phase B. |
89 | Description: Cutter jam. |
A9 | Description: Abnormal scanning reference voltage. |
D2 | Description: CTS stays OFF or ON if the MODEM RTS is turned ON or OFF, respectively. |